Test Method | Unit | Guideline Value | |
---|---|---|---|
Densité | ASTM D792 | g / cm3 | 1.24 |
Water Absorption 24 hours | ASTM D570 | % | 0.3 |
Dissipation Factor | ASTM D150 | 1MHz | 0.005 |
Water Absorption Saturation | ASTM D570 | % | 0.6 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Hardness | ASTM D2240 | Shore D | 80 |
Tensile Strength at yield 73°F | ASTM D638 | psi | 10200 |
Tensile Modulus | ASTM D638 | psi | 360000 |
Elongation at Break | ASTM D638 | % | 30 |
Flexural Strength | ASTM D790 | psi | 15400 |
Flexural Modulus | ASTM D790 | psi | 390000 |
Compressive Strength | ASTM D695 | psi | 13900 |
Rockwell Hardness | ASTM D785 | 75 | |
Rockwell Hardness | ASTM D785 | R | 125 |
Shear Strength | ASTM D732 | psi | 9000 |
Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.3 |
Coefficient of Friction, Dynamic | 0.36 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Thermal Conductivity | in/hr/ft2 /°F | 1.7 | |
Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 3.1 |
Continuous Service Temperature, Air | °F | 300 | |
Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 345 |
Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 359 |
Flammability, UL94 | 1/8 inch | V-0 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Dielectric constant | ASTM D150 | 1MHz | 3.06 |
Dielectric strength | ASTM D149 | V/mil | 425 |
Surface resistivity | ASTM D257 | Ω/cm | >1013 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
FDA | Yes | ||
NSF | No | ||
USDA | Yes |