Durostone® PMP 376
GFK-UP
Durostone®compression moulded parts
With modern presses and precise tools we produce the most varied FRP components and pressed parts from SMC and BMC-polyester products. In the SMC technique, a combination of resin and fibres is cured in a mould under pressure and heat. The production method enables time savings, high reproducibility and a smooth surface. The process is particularly suitable for medium-sized series.
Dimensions
With our presses we are able to produce pressed parts with dimensions of 150 x 150 x 150 mm up to 2,200 x 1,600 x 1,200 mm.
Characteristics
- Polyester (UP) resin matrix reinforced by fiberglass
- Electrically insulating
Technical Specifications Durostone® PMP 376
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Standard Color | RAL7035 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Flexural strength ┴ | ISO 178 | MPa | 350 |
| Modulus of elasticity in flexion ┴ | ISO 178 | MPa | - |
| Tensile strength II | ISO 527 | MPa | 250 |
| Impact strength II (Charpy) | ISO 179 | kJ / m2 | 80 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ISO 1183 | g / cm3 | 1.9 |
| Water absorption (4mm thickness) | ISO 62 | % | 0.5 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Electric strength 90°C under oil ┴ | IEC 60243 | kV / mm | 10 |
| Comparative tracking index | IEC 60112 | CTI | 600 |
| Insulation resistance ┴ | IEC 60631-3-1 | Ω/cm | 1012 |
