CZ

Prosím, vyberte jazyk

 

Sustamid® 6 FR natural

PA — PA 6

Polyamide with built-in fire protection

An economic solution for small up to medium quantities

Are you searching for a flame - retardant material which is comparable to a high-performance plastic such as PEEK and fulfils all needed requirements you need on the international railway market, beginning with the V0 in accordance to the UL 94 and especially the European standard EN 45545? Sustamid® 6 FR is the solution for extruded semi-finished products made of flame-retardant polyamide 6 (PA 6). It is available as sheets, rods and tubes.

natural
sheetrod
QR-Code

Characteristics

  • Free of halogen and phosphorus
  • Flame retardant
  • Self-extinguishing
  • High hardness
  • High rigidity
  • Good sliding properties
  • Good wear properties
  • Good machinability
  • Good dimensional stability
  • Certified according to EN 45545-2

Application Examples

Kabelové svorky z materiálu Sustamid® 6 FR

Náš materiál Sustamid® 6 FR splňuje příslušné požadavky normy pro kolejová vozidla DIN EN 45545-2:2013 a jako extrudovaný polotovar Vám umožňuje vyrábět velkorozměrné hotové díly v malém počtu kusů – například kabelové svorky pro kolejová vozidla.

Klíny a distanční destičky z materiálu Sustamid® 6 FR pro výhybky

Klíny a distanční destičky obráběné v úzkých tolerancích z našeho obtížně zápalného materiálu Sustamid® 6 FR pro výhybky Vám pomohou při konstrukci výkonných kolejnicových systémů s nízkými nároky na údržbu.

Application areas

Ideal material for applications where very high demands are placed on fire behavior, mechanical properties and weight.

Certifications

Sustamid® 6 FR fulfills a large number of certifications, such as EN 45545, BS 6859, DIN 5510, BSS 7239, NFPA130, UL 94 (V0) and others.

Technical Specifications Sustamid® 6 FR natural

Test MethodUnitGuideline Value
DensityDIN EN ISO 1183-1g / cm31,17
Water absorptionDIN EN ISO 62%3,0
Flammability (Thickness 3 mm / 6 mm)UL 94V0 / V0
Test MethodUnitGuideline Value
Yield stressDIN EN ISO 527MPa82
Elongation at breakDIN EN ISO 527%3
Tensile modulus of elasticityDIN EN ISO 527MPa3800
Shore hardnessDIN EN ISO 868scale D83
Test MethodUnitGuideline Value
Melting temperatureISO 11357-3°C222
Thermal capacityDIN 52612kJ / (kg * K)1,70
Coefficient of linear thermal expansionDIN 5375210-6 / K90
Service temperature, long termAverage°C-20 … 85
Service temperature, short term (max.)Average°C160
Heat deflection temperatureDIN EN ISO 75, Verf. A, HDT°C65
Test MethodUnitGuideline Value
Volume resistivityDIN EN 62631-3-1Ω * cm1013
Surface resistivityDIN EN 62631-3-2Ω1016

Contact

Máte možnost přiložit soubory ke své zprávě. Soubory musí být ve formátu JPEG, PNG, BMP nebo PDF. Ujistěte se prosím, že přidáváte soubory pouze do 8 MB

Information on data protection can be found here.

Obnovit
 
Search
Kontakt

Share

Přihlášení k odběru newsletteru

Select Website

Roechling_Industrial_Banner.jpg
Plasty pro technické použití

Industrial