Sustamid® 66 GF 30 black
PA — PA 66
black
sheetrod
Characteristics
- High hardness
- High rigidity
- High heat deflection temperature
- Good dimensional stability
- High absorption of moisture depending on temperature and humidity
Industries
Variants
Technical Specifications Sustamid® 66 GF 30 black
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hustota | DIN EN ISO 1183-1 | g / cm3 | 1,32 |
| Water absorption | DIN EN ISO 62 | % | 1,7 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 85 |
| Elongation at break | DIN EN ISO 527 | % | 5 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 4500 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 4 |
| Shore hardness | DIN EN ISO 868 | scale D | 86 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | 260 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,24 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,50 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 50 |
| Service temperature, long term | Average | °C | -20 … 120 |
| Service temperature, short term (max.) | Average | °C | 200 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 150 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Volume resistivity | DIN EN 62631-3-1 | Ω * cm | 1013 |
| Surface resistivity | DIN EN 62631-3-2 | Ω | 1010 |
| Comparative tracking index | IEC 60112 | 550 | |
| Dielectric constant @ 1MHz | DIN EN IEC 62631-2-1 | 3,8 | |
| Dielectric dissipation factor (1 MHz) | DIN EN IEC 62631-2-1 | 0,015 | |
| Electric strength | IEC 60243-1 | kV / mm | 25 |
