Select a different country or region to see specific content for your location.
Fast and Precise Powder Sintering
Process
In the SLS process, the polymer powder is preheated to just below the materials melting point in the build chamber. A fine layer of powder is distributed via a roller and the printing area is subsequently scanned with a CO2 laser, allowing the particles to fuse together.
Machine
Details
Machine: EOS Formiga P 110
Material: (Standard): PA 12
Optional: PA 11, PA 12 (reinforced), PA 12 (flame retardant), Polypropylene (PP), TPU, PA6 MF
Characteristics
| Surface | ⬤ | ⬤ | ⬤ | ⬤ | ◯ |
| Resolution | ⬤ | ⬤ | ⬤ | ⬤ | ◯ |
| Strength | ⬤ | ⬤ | ⬤ | ⬤ | ◯ |
| Toughness | ⬤ | ⬤ | ⬤ | ◯ | ◯ |
Advantages at a Glance
- Fast and efficient printing
- Diverse material selection
- High design freedom
Parameters
Build Volume: 200 x 250 x 330 mm (XYZ)
Minimal Wall Thickness: 0.5 mm
Accuracy: ±0.2 mm
Layer Thickness: 0.1 mm
Material Properties
Tensile Modulus: 1700 MPa (ISO 527)
Tensile Strength: 48 MPa (ISO 527)
Elongation at Break (XY): 24 % (ISO 527)
Charpy Impact (notched): 4.8 kJ/m² (ISO 179)
Charpy Impact (unnotched): 53 kJ/m² (ISO 179)
Melting temperature: 172-180 °C/341-356 °F
Application Areas
- Low volume prodution of end-use parts
- Prototyping for performance and fit testing
- Cost effective alternative to injection molding
