Durostone® EPC 205
GFK-EP
Durostone® EPC 205 è un materiale plastico fibrorinforzato con una resistenza meccanica eccezionalmente elevata. Il rinforzo è ottenuto da un tessuto in roving di vetro e ha un’infiammabilità definita.
Characteristics
- High dielectric strength
- High mechanical strength
- Flame retardant
- High-pressure laminate
- Special epoxy (EP) resin matrix reinforced with an e-glass roving fabric
Industries
Semiconductor High and low temperature
Technical Specifications Durostone® EPC 205
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ISO 1183 | g / cm3 | 2,05 |
| Flexural strength ┴ | ISO 178 | MPa | 600 |
| Flexural strength ┴ +150°C | ISO 178 | MPa | 500 |
| Modulus of elasticity in flexion ┴ | ISO 178 | MPa | 30000 |
| Modulus of elasticity in flexion ┴ +150°C | ISO 178 | MPa | 26000 |
| Compressive strength ┴ | ISO 604 | MPa | 600 |
| Compressive strength II | ISO 604 | MPa | 450 |
| Tensile strength II | ISO 527 | MPa | 450 |
| Impact strength II (Charpy) | ISO 179 | kJ / m2 | 300 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Flammability | UL 94 | / | V0 / 3mm |
| Temperature index | IEC 60216 | T.I. | 180 |
| Insulation class | IEC 60085 | / | H |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Water absorption (method 1) | ISO 62 | % | 0,2 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Electric strength 90°C under oil ┴ | IEC 60243 | kV / mm | 13 |
| Electric strength 90°C under oil II | IEC 60243 | kV/25mm | 70 |
| Relative permittivity (50 Hz) | IEC 60250 | εr | 5 |
| Dielectric loss factor (50 Hz) | IEC 60250 | tan δ | 0,04 |
| Specific surface resistance | IEC 60093 | Ω | 1012 |
| Specific volume resistance | IEC 60093 | Ω x cm | 1014 |
| Comparative tracking index (test solution A) | IEC 60112 | CTI | 600 |
| Insulation resistance after 24 h water immersion | IEC 60167 | Ω | 1010 |
