Select a different country or region to see specific content for your location.
ES

Seleccione un idioma

 

Fast and Precise Powder Sintering, Without Lasers

Process

By selectively applying fusing and detailing agents across a bed of polymer powder, heating elements subsequently fuse the printed regions into a solid layer. Layer by layer, powder is redistributed over the bed and the process repeats until the part is complete.

Product Example

Details

Machine: HP Jet Fusion 4200

Material: PA 12

Color: Grey, Black (optional post-coloring)

Characteristics

Surface
Resolution
Strength
Toughness

 

Advantages at a Glance

  • Fast and efficient printing
  • Accuracy with large parts
  • Good surface quality
  • High material density

Parameters

Build Volume: 370 x 274 x 380 mm (XYZ)

Minimal Wall Thickness: 1.0 mm

Accuracy: ±0.3 mm

Layer Thickness: 0.08 mm 

Tolerances: 0.4 mm between assemblies

Material Properties

Tensile Modulus: 1800 MPa (ASTM D638)

Tensile Strength: 48 MPa (ASTM D638)

Elongation at Break (XY): 20 % (ASTM D638)

Elongation at Break (Z): 15 % (ASTM D638)

Melting Point: 187 °C/369 °F

HDT (@ 0.45 MPa): 175 °C/350 °F (ASTM D648)

Application Areas

  • Low volume prodution of end-use parts
  • Prototyping for performance and fit testing
  • Cost effective alternative to injection molding
  • Parts for automotive interior and exterior

See other manufacturing methods

Downloads

 
Search

Refine Results

Contacto

Share

Select Website