Sustason® PSU MG - ASTM
PSU
Technical Specifications Sustason® PSU MG - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Densité | ASTM D792 | g / cm3 | 1.24 |
| Water Absorption 24 hours | ASTM D570 | % | 0.3 |
| Water Absorption Saturation | ASTM D570 | % | 0.6 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 80 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 10200 |
| Tensile Modulus | ASTM D638 | psi | 360000 |
| Elongation at Break | ASTM D638 | % | 30 |
| Flexural Strength | ASTM D790 | psi | 15400 |
| Flexural Modulus | ASTM D790 | psi | 390000 |
| Rockwell Hardness | ASTM D785 | 75 | |
| Rockwell Hardness | ASTM D785 | R | 125 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.3 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 1.7 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 3.1 |
| Continuous Service Temperature, Air | °F | 300 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 345 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 359 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resistivity | ASTM D257 | Ω/cm | >1013 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | Yes | ||
| NSF | No | ||
| USDA | Yes |
