Maywotron® PS P
PS
Maywotron® P products are permanent antistatically equipped plastics with a surface resistivity and volume resistivity of 10^9-11 Ω which prevents electrostatic charge.
Maywotron® P products are mainly used in the transport, packaging, electronics and automotive sectors (e.g. transport trays, crates, storage boxes, blister strips and blister packs) and in electrostatic protected areas (EPA).
Characteristics
- Protection of electronic devices from electrostatic phenomena
- Antistatique
Technical Specifications Maywotron® PS P
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Densité | DIN EN ISO 1183-1 | g / cm3 | 1,06 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Yield stress | DIN EN ISO 527 | MPa | 18 |
| Elongation at break | DIN EN ISO 527 | % | 70 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 1700 |
| Notched impact strength | DIN EN ISO 180 | kJ / m2 | 8 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | °C | >170°C |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,17 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 90 |
| Service temperature, long term | Average | °C | 80 |
| Service temperature, short term (max.) | Average | °C | 90 |
| Vicat softening temperature | DIN EN ISO 306, Vicat B | °C | 90 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resisitivity | DIN EN 61340 | Ω | 109 - 1011 |
| Volume resistivity | DIN EN 61340 | Ω | 109 - 1011 |
