Select a different country or region to see specific content for your location.
Metering rod beds
Manufacturing ROBACOAT metering rod beds for paper machines from the basic material right through to the end product, Röchling Industrial possesses years of expertise in the sinter pressing procedure, machining parameters, and production control required for this product. This ensures that the metering rod bed quality remains consistently high.
ROBACOAT-B
The special blend of ROBACOAT-B has been coordinated to the requirements of coating units, alloyed with various additives and optimized to ensure low friction.
- Lower drive energy
- Increased service life (bed & rod)
- Rod and bed fit together perfectly
- Rod is quick and easy to install
- Ultimate flexibility in both shape and delivery time
Application
Metering system where rods & beds are in use
ROBACOAT-PB
Metering rod bed with further reduction in sliding friction compared with the classic ROBACOAT-B.
- Up to 50% lower energy consumption
- Up to 50% less wear
- Increased system service life
Application
For film-press and coating units with abrasive coating medium to reduce wear
ROBACOAT-PBA
Adjustable metering system for premium beds.
- No lubrication leakage
- Wear compensation
- Increased endurance
Application
For film-press and coating units with abrasive coating medium to reduce wear
ROBACOAT-BRZ
Special metering rod bed solution with plug-in module for edge zones with high thermal loads.
- Inserts for minimal wear in edge section
- Increased service life
Application
For excessive thermal loads in the edge section
ROBACOAT Speedrod-M
Modular system for VOITH Paper systems for the ultimate reduction in unscheduled coating unit downtimes.
- Enhanced production protection
- Huge time and cost savings for tube changes
- Fewer wear parts
- Easy to clean, because of no air tubes in the coating unit
Application
Only suitable for VOITH Paper systems
Arrange technical advice
The performance and reliability of components used for paper machines are influenced by a variety of factors. These criteria need to be considered in order to make the right choice. Examples:
- Mechanical loading
- Thermal loading
- Operating temperature
- Design requirements
- Dimensions and tolerances
We are happy to advise you on the selection of suitable materials for your particular application. Just use our contact form at the bottom of the page and write to us.
