Sustarin® C MG - ASTM
POM-C
Sustarin® C MG (Hostaform® MT2U06)
Sustarin® C MG is easy to machine to close tolerances and is very dimensionally stable. The material has excellent wear properties and low coefficient of friction.
About:
- 12 standard colors available
- Directly compounded by Celanese
- Produced in our ISO 13485 facility
- 100% Lot Ultra-Sonic Tested
Characteristics
- High mechanical strength
- High stiffness
- Good impact strength
- Multi-sterilisable with hot steam, plasma as well as ethylene oxide
- Low moisture absorption
Industries
- Pharma
Technical Specifications Sustarin® C MG - ASTM
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Density | ASTM D792 | g / cm3 | 1.41 |
| Water Absorption | ASTM D570 | % | 0.9 |
| Water Absorption 24 hours | ASTM D570 | % | 0.2 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Hardness | ASTM D2240 | Shore D | 85 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 9500 |
| Tensile Modulus | ASTM D638 | psi | 400000 |
| Elongation at Break | ASTM D638 | % | 40 |
| Flexural Strength | ASTM D790 | psi | 12000 |
| Flexural Modulus | ASTM D790 | psi | 400000 |
| Rockwell Hardness | ASTM D785 | 88 | |
| Rockwell Hardness | ASTM D785 | R | 120 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.2 |
| Coefficient of Friction, Dynamic | 0.21 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Thermal Conductivity | in/hr/ft2 /°F | 1.6 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 5.5 |
| Melting Point | °F | 330 | |
| Continuous Service Temperature, Air | °F | 180 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 225 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 320 |
| Flammability, UL94 | 1/8 inch | HB |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| Surface resistivity | ASTM D257 | Ω/cm | 1016 |
| Test Method | Unit | Guideline Value | |
|---|---|---|---|
| FDA | Yes |
