Test Method | Unit | Guideline Value | |
---|---|---|---|
Density | ASTM D792 | g / cm3 | 1.35 |
Water Absorption 24 hours | ASTM D570 | % | 0.01 |
Dissipation Factor | ASTM D150 | 1MHz | 0.001 |
Water Absorption Saturation | ASTM D570 | % | 0.03 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Hardness | ASTM D2240 | Shore D | 85 |
Tensile Strength at yield 73°F | ASTM D638 | psi | 13000 |
Tensile Modulus | ASTM D638 | psi | 480000 |
Elongation at Break | ASTM D638 | % | 15 |
Flexural Strength | ASTM D790 | psi | 21000 |
Flexural Modulus | ASTM D790 | psi | 575000 |
Compressive Strength | ASTM D695 | psi | 21000 |
Rockwell Hardness | ASTM D785 | 95 | |
Rockwell Hardness | ASTM D785 | R | 125 |
Shear Strength | ASTM D732 | psi | 9000 |
Izod Impact, Notched | ASTM D256 | ft-lb/in | 0.5 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Thermal Conductivity | in/hr/ft2 /°F | 2 | |
Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 2.8 |
Melting Point | ASTM D789 | °F | 535 |
Continuous Service Temperature, Air | °F | 425 | |
Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 230 |
Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 400 |
Flammability, UL94 | 1/8 inch | V-0 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
Dielectric constant | ASTM D150 | 1MHz | 3 |
Dielectric strength | ASTM D149 | V/mil | 540 |
Surface resistivity | ASTM D257 | Ω/cm | >1013 |
Test Method | Unit | Guideline Value | |
---|---|---|---|
FDA | Yes | ||
NSF | No | ||
USDA | Yes |