Technische Daten SustaPEEK MG - ASTM
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Dichte | ASTM D792 | g / cm3 | 1.32 |
| Water Absorption 24 hours | ASTM D570 | % | 0.1 |
| Water Absorption Saturation | ASTM D570 | % | 0.5 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Härte | ASTM D2240 | Shore D | 85 |
| Tensile Strength at yield 73°F | ASTM D638 | psi | 16000 |
| Tensile Modulus | ASTM D638 | psi | 500000 |
| Reißdehnung | ASTM D638 | % | 20 |
| Flexural Strength | ASTM D790 | psi | 25000 |
| Flexural Modulus | ASTM D790 | psi | 600000 |
| Rockwell Hardness | ASTM D785 | 105 | |
| Rockwell Hardness | ASTM D785 | R | 126 |
| Izod Impact, Notched | ASTM D256 | ft-lb/in | 1.2 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Wärmeleitfähigkeit | in/hr/ft2 /°F | 1.73 | |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in/°F x10-5 | 2.6 |
| Melting Point | ASTM D789 | °F | 630 |
| Continuous Service Temperature, Air | °F | 480 | |
| Deflection Temperature at 1.8Mpa (264psi) | ASTM D648 | °F | 320 |
| Deflection Temperature at 1.8Mpa (66psi) | ASTM D648 | °F | 360 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| Oberflächenwiderstand | ASTM D257 | Ω/cm | >1013 |
| Testmethode | Einheit | Richtwert | |
|---|---|---|---|
| FDA | Yes | ||
| NSF | No | ||
| USDA | Yes |
